|
Repeatability of position |
<0.4 μm (0.00002 in) @ 100 mm from centre of A-axis rotation |
|
Positioning |
|
|
Step |
7.5° |
|
A-axis 0° to 105° |
15 positions |
|
B-axis -180° to +180° |
48 positions |
|
Total |
720 positions |
|
Probe mounting |
|
|
PH10T PLUS |
M8 thread, 18 mm diameter bush face |
|
PH10M PLUS / PH10MQ PLUS |
Multiwired autojoint |
|
Dimensions from quill face |
|
|
XY (all) |
62 mm |
|
Z (PH10T PLUS) |
102 mm |
|
Z (PH10M PLUS) |
117 mm |
|
Z (PH10MQ PLUS) |
73 mm |
|
Weight |
|
|
PH10T PLUS |
595 g |
|
PH10M PLUS |
620 g |
|
PH10MQ PLUS |
730 g |
|
System operating temperature |
+10 °C to +40 °C (+50 °F to +104 °F) |
|
System storage temperature |
-10 °C to +70 °C (+14 °F to +158 °F) |
The PHC10-3 PLUS is powered from the ac mains supply via an IEC 320 connector.
The operating voltages of the unit are as follows:
100 Vac - 240 Vac +10%, -15% 47 Hz - 66 Hz, 30 W maximum
The following environmental conditions comply with those defined in BS EN61010 - 1:2001:
|
Indoor use |
IP30 (no protection against liquids) |
|
Altitude |
Up to 2000 m |
|
Operating temperature range |
0 °C to +50 °C |
|
Storage temperature range |
-10 °C to +70 °C |
|
Relative humidity |
80% maximum for temperatures up to +31 °C |
|
Pollution degree |
2 |
| Part number | |
|
PH10M PLUS motorised indexing probe head kits For use with multiwired probes and extension bars |
|
|
PH10M PLUS probe head and shank kit (see below for complete part no.) |
A-5863-11** |
|
PH10M PLUS probe head, AM1 and shank kit (see below for complete part
no.) |
A-5863-19** |
|
PH10M PLUS probe head only |
A-5863-4000 |
|
PH10M PLUS probe head and AM1 kit |
A-5863-1060 |
|
PH10MQ PLUS quill mounted, motorised indexing probe head kits For use with multiwired probes and extension bars |
|
|
PH10MQ PLUS probe head kit |
A-5863-6000 |
|
PH10T PLUS motorised indexing probe head kits For use with M8 threaded touch-trigger probes and extension bars |
|
|
PH10T PLUS probe head and shank kit (see below for complete part no.) |
A-5863-25** |
|
PH10T PLUS probe head only |
A-5863-5000 |
|
PH10M-iQ PLUS motorised indexing probe head kits with inferred qualification For use with multiwired probes and extension bars |
|
|
PH10M-iQ PLUS probe head kit |
A-5863-7000 |
|
PH10 PLUS head controllers and hand control units |
|
|
PHC10-3 PLUS RS232 head controller (includes 24 V PSU) |
A-5863-0100 |
|
PHC10-3 PLUS head controller with integral PI 200-3 interface (includes 24 V
PSU,
4 feet, documentation CD
and USB driver) |
A-5863-0200 |
|
PHC10-3 PLUS head controller with integral PI 200-3 interface, additional
PICS
output port and PL25(T) PICS
cable (includes 4 feet, documentation CD and USB driver) |
A-5863-0300 |
|
HCU2 hand control unit |
A-5882-0010 |
|
PH10 PLUS accessories |
|
|
AM1 adjustment module for PH10M PLUS, PH10T PLUS, PH6M and MIH |
A-1026-0320 |
|
AM2 adjustment module for PH10MQ PLUS |
A-1036-0080 |
|
PHA3 - PH10MQ PLUS to KM1 quick change adaptor |
A-2238-0751 |
|
24 V PSU for PHC10-3 PLUS, PI 200-3 and PI 7-3 |
P-EA02-0042 |
|
1U bracket kit |
A-1018-0189 |
|
1/3 x 1U bracket |
A-1018-0179 |
|
PHC10-2 bracket 1U to 2U |
A-1018-0173 |
|
PH10M PLUS A-5863- |
PH10M PLUS (with AM1) A-5863- |
PH10T PLUS A-5863- |
|
|
MS1 |
1139 |
2521 |
|
|
MS2 |
1135 |
2522 |
|
|
MS3 |
|||
|
MS4 |
2524 |
||
|
MS5 |
|||
|
MS6 |
1136 |
2526 |
|
|
MS7 |
2527 |
||
|
MS8 |
1137 |
||
|
MS9 |
1141 |
||
|
MS10 |
|||
|
MS11 |
|||
|
MS12 |
1155 |
2530 |
|
|
MS13 |
1142 |
2531 |
|
|
MS14 |
2532 |
||
|
MS15 |
1140 |
2533 |
|
|
MS17 |
1991 |
||
|
D shank |
